View Issue Details

IDProjectCategoryView StatusLast Update
0004799FreeCADBugpublic2021-12-08 16:43
Reporterdrmacro Assigned To 
PrioritynormalSeverityminorReproducibilityalways
Status newResolutionopen 
Product Version0.20 
Summary0004799: Part Design Loft between two shapbinders fails, but Part Loft works with only an out of scope warning.
DescriptionPart Design Loft between two shapbinders fails, but Part Loft works with only an out of scope warning.

This inconsistent behavior; shapebinders can be used with Part Design Pad.

In addition, A Part Sweep of a Part Helix and a shapebinder works, but the Part Design Helix also fails with a Shapebinder.

Unless there is a specific reason the ShapeBinder can't work with Part Design tools, for consistency, it should work with none or all?

Forum thread contains example file and discussion.
Steps To ReproduceCreate two shapbinders and attempt to Loft, Helix etc.

Forum thread contains example file and discussion.
TagsNo tags attached.
FreeCAD InformationOS: Debian GNU/Linux 10 (buster) (XFCE/lightdm-xsession)
Word size of FreeCAD: 64-bit
Version: 0.20.26583 (Git)
Build type: Release
Branch: master
Hash: 4bd77b3b35ea794057ffe6a55858b7b1abee7ed0
Python version: 3.7.3
Qt version: 5.11.3
Coin version: 4.0.0a
OCC version: 7.3.0
Locale: English/UnitedStates (en_US)

Activities

yorik

2022-03-03 13:55

administrator   ~0017122

This ticket has been migrated to GitHub as issue 6291.

Issue History

Date Modified Username Field Change
2021-12-08 16:43 drmacro New Issue