View Issue Details

IDProjectCategoryView StatusLast Update
0004769PathBugpublic2021-10-18 20:36
Reportersliptonic Assigned Tosliptonic  
PrioritynormalSeverityminorReproducibilityalways
Status assignedResolutionopen 
Product Version0.20 
Target Version0.20 
Summary0004769: Changing TC with same tool number but different spindle speed doesn't produce correct gcode
DescriptionThe user may desire to run the same tool at different feeds and speeds within a job. This is achieved by creating two tool controllers and using the same tool number for both. During post processing, the tool number of the new tool is compared to the old one and if they are the same, the tool change code is suppressed. This is correct behavior. However, if the spindle speed changes, an M3 (or M4) with the new spindle speed should be emitted and it is not.



Additional Informationhttps://forum.freecadweb.org/viewtopic.php?f=15&t=62762&start=10
TagsNo tags attached.
FreeCAD InformationAll versions and platforms are affected

Activities

There are no notes attached to this issue.

Issue History

Date Modified Username Field Change
2021-10-18 20:36 sliptonic New Issue
2021-10-18 20:36 sliptonic Status new => assigned
2021-10-18 20:36 sliptonic Assigned To => sliptonic