View Issue Details

IDProjectCategoryView StatusLast Update
0004767FreeCADBugpublic2021-10-17 20:08
ReporterBruceL Assigned To 
Status newResolutionopen 
Product Version0.20 
Summary0004767: Pocket using SubShapeBinder does not occur on orthogonal axis.
DescriptionForum Post

When making pockets with sub-shapebinders, FreeCAD insists on pocketing along the z-axis.
Steps To Reproduce1. Open the attached SM-PLB03A case file.
2. make "SLIDE_IN" the active body
3. select the "vent_binder" subshapebinder in "SLIDE_IN"
4. pocket the "vent_binder"
5. observe that the pocket appears to be along the z axis as it appears in the section below the "vent binder" instead of along the y axis where I would expect it.
6. note that the "thread_holes_2" pocket, which is also based on a subshapebinder from "MAIN_CASE" works fine (but it's along the z-axis)
TagsNo tags attached.
FreeCAD InformationOS: Debian GNU/Linux bookworm/sid (GNOME/gnome)
Word size of FreeCAD: 64-bit
Version: 0.20.25997 (Git) AppImage
Build type: Release
Branch: master
Hash: 77b198048a63f1e9ca15eef64c8042d599a14cf3
Python version: 3.9.7
Qt version: 5.12.9
Coin version: 4.0.0
OCC version: 7.5.2
Locale: English/Canada (en_CA)



2021-10-17 20:08


SM-PLB03A case.FCStd (723,727 bytes)

Issue History

Date Modified Username Field Change
2021-10-17 20:08 BruceL New Issue
2021-10-17 20:08 BruceL File Added: SM-PLB03A case.FCStd