View Issue Details

IDProjectCategoryView StatusLast Update
0004634PartDesignBugpublic2021-04-15 23:31
ReporterSarenT Assigned To 
Status newResolutionopen 
Product Version0.19 
Summary0004634: Subtractive cylinder ends up being added
DescriptionI was trying to subtract a cylinder to make a hole on an object. This worked for a few times but not this last time. It is centered around a datum line, which is rotated. It cuts through an inner cone, I generated with a revolved sketch.
Steps To Reproduce
  1. In this case, I have revolved a sketch.
  2. Subtracted a revolved sketch to generate a pocket.
  3. Made a tilted datum line.
  4. Referenced datum point for a subtractive cylinder.
  5. Polar pattern for that cylinder
  6. Another subtr. cyl. ref. on Z axis.
  7. Multitransform pattern (linear and polar)
  8. Another tilted datumline
  9. Subtractive cylinder ref. that datum line ends up either failed subtraction or parts of cylinder being added.
TagsNo tags attached.
FreeCAD InformationOS: Ubuntu 18.04.5 LTS (ubuntu:GNOME/ubuntu)
Word size of OS: 64-bit
Word size of FreeCAD: 64-bit
Version: 0.19.
Build type: Release
Branch: unknown
Hash: c240777a7de9fbb69472e6cbf589e83559a9ef17
Python version: 3.6.9
Qt version: 5.9.5
Coin version: 4.0.0a
OCC version: 7.5.1
Locale: English/UnitedStates (en_US)


There are no notes attached to this issue.

Issue History

Date Modified Username Field Change
2021-04-15 23:31 SarenT New Issue