View Issue Details

IDProjectCategoryView StatusLast Update
0004607PartDesignBugpublic2021-03-26 18:56
Reporterdrmacro Assigned To 
Status newResolutionopen 
PlatformPCOSLinuxOS VersionUb20.04, Deb10
Product Version0.19 
Summary0004607: Can't loft to a Point object in Part Design
DescriptionThis is the same in 0.19 and 0.20

With either a point (toggled to real geometry) in a sketch or a Draft Point you can loft in Part workbench.
(Thus creating a pyramid)
But, error is thrown if attempt is made in Part Design.

Steps To ReproduceSwitch to Part Design WB
Create a sketch, on XY_Plane, with a rectangle, close sketch
Create another sketch, on XY_Plane, offset in Z, create a point
(point is created by default as reference geometry)toggle point to real geometry
Close sketch.
Select sketches and attempt to loft.
Error: Loft: Sections need to have same amount of inner wires as the base section.

This is inconsistent since it works in Part WB.
TagsNo tags attached.
FreeCAD InformationOS: Ubuntu 20.04.2 LTS (XFCE/ubuntustudio)
Word size of OS: 64-bit
Word size of FreeCAD: 64-bit
Version: 0.20.24498
Build type: Unknown
Branch: master
Hash: 148c528b09c40c302ac5edaff9f2659935094f5c
Python version: 3.8.5
Qt version: 5.12.8
Coin version: 4.0.0
OCC version: 7.5.1
Locale: English/United States (en_US)


There are no notes attached to this issue.

Issue History

Date Modified Username Field Change
2021-03-26 18:56 drmacro New Issue