View Issue Details

IDProjectCategoryView StatusLast Update
0004605FEMBugpublic2021-03-24 17:17
ReporterJee-Bee Assigned To 
PrioritynormalSeverityfeatureReproducibilityalways
Status newResolutionopen 
Product Version0.20 
Summary0004605: FEM ignore Force / Pressure constraints during *FREQUENCY calculation
DescriptionDuring a frequency calculation things like masses, forces etc change the result on *FREQUENCY calculation. But these things are ignored in FreeCAD.
Steps To Reproduce
  1. Create base part (for example beam
  2. Add fixed constraint on end point
  3. add force constraint on other end in direction of the beam
  4. Run writer
  5. check inp file for output. it isn't there
Additional InformationSee: http://feacluster.com/CalculiX/ccx_2.13/doc/ccx/node8.html
See: https://forum.freecadweb.org/viewtopic.php?f=18&t=20392

See calculix example: http://feacluster.com/CalculiX/ccx_2.13/doc/ccx/input_deck_viewer.php?input_deck=beamf2.inp
Tagscalculix, FEM
FreeCAD Information<!--ATTENTION:
COMPLETELY ERASE THIS AFTER PASTING YOUR
Help > About FreeCAD > Copy to clipboard
NOTE: just the snippet alone will do without anything else included.
The ticket will not be submitted without it.
-->

Activities

yorik

2022-03-03 13:55

administrator   ~0017015

This ticket has been migrated to GitHub as issue 6183.

Issue History

Date Modified Username Field Change
2021-03-24 17:17 Jee-Bee New Issue
2021-03-24 17:17 Jee-Bee Tag Attached: calculix
2021-03-24 17:17 Jee-Bee Tag Attached: FEM