View Issue Details

IDProjectCategoryView StatusLast Update
0004482FreeCADFeaturepublic2021-02-06 06:49
ReporterPauvres_honteux Assigned To 
PrioritynormalSeverityfeatureReproducibilityalways
Status newResolutionopen 
Target Version0.20 
Summary0004482: Create point on plane while at the same time beeing connected to another point in/on the same plane.
DescriptionPoint on plane with respect to another point

As of 2020-11-02

it is not possible to create a point on a plane while at the same time being connected to another point on that plane.
Steps To ReproduceIn Part:

- Create 1:st point, to be used as master point.
- Create 2:nd point and connect it to the first point by typing Vertex(vertex number here).Placement.Base.x Repeat for Y and Z. Set "Attachment offset" to [20,0,0].
- Create 3:rd point and connect it to the first point by typing Vertex(vertex number here).Placement.Base.x Repeat for Y and Z. Set "Attachment offset" to [0,30,0].
- Create 4:th point and connect it to the first point by typing Vertex(vertex number here).Placement.Base.x Repeat for Y and Z. Set "Attachment offset" to [0,0,40].
- Create a plane_1 passing through point 1, 2 and 3.
- Create a plane_2 passing through point 1, 3 and 4.
- Create a plane_3 passing through point 1, 4 and 2.
- Create a point on one of the planes and try to connect it to point 1 -> does not work.
______________________________________________________________________
In PartDesign:

- Create 1:st (Datum)point, to be used as master point.
- Create 2:nd (Datum)point and connect it to the first point by choosing "Support" = (Datum)point 1 and Map Mode = Vertex. Set "Attachment" = [20,0,0]
- Create 3:rd (Datum)point and connect it to the first point by choosing "Support" = (Datum)point 1 and Map Mode = Vertex. Set "Attachment" = [0,30,5]
- Create 4:th (Datum)point and connect it to the first point by choosing "Support" = (Datum)point 1 and Map Mode = Vertex. Set "Attachment" = [-10,-15:40]
- Create a plane_1 passing through point 1, 2 and 3 ("Map Mode" 'ThreePointsPlane').
- Create a plane_2 passing through point 1, 3 and 4. ("Map Mode" 'ThreePointsPlane')
- Create a plane_3 passing through point 1, 4 and 2. ("Map Mode" 'ThreePointsPlane')
- Create a point on one of the planes and try to connect it to point 1 -> does not work.
TagsNo tags attached.
FreeCAD InformationOS: openSUSE Leap 15.1 (KDE//usr/share/xsessions/default)
Word size of OS: 64-bit
Word size of FreeCAD: 64-bit
Version: 0.19.Unknown
Build type: Release
Python version: 3.6.5
Qt version: 5.9.7
Coin version: 4.0.0
OCC version: 7.5.0.beta

Activities

There are no notes attached to this issue.

Issue History

Date Modified Username Field Change
2020-11-02 11:52 Pauvres_honteux New Issue
2021-02-06 06:49 abdullah Target Version => 0.20