View Issue Details

IDProjectCategoryView StatusLast Update
0004458PathBugpublic2021-02-06 06:33
Reportersliptonic Assigned Tosliptonic  
PrioritynormalSeverityminorReproducibilityalways
Status resolvedResolutionfixed 
Target Version0.20 
Summary0004458: [PATH] Engrave 'start at vertex' gives wrong path
DescriptionThe engraving operation allows for changing the vertex to start at. Some values produce correct paths. Others
produce paths that gouge the part.
Steps To ReproduceCreate a cube.
Create a job and add an engrave operation
Select the four edges on the top face and add them to the base tab of the engrave
The path should generate correctly.
change the 'start at vertex' property to '3' and recompute

The starting position is recalculcated but the path now gouges the part and misses one edge.
TagsNo tags attached.
FreeCAD Information<!--ATTENTION:
COMPLETELY ERASE THIS AFTER PASTING YOUR
Help > About FreeCAD > Copy to clipboard
NOTE: just the snippet alone will do without anything else included.
The ticket will not be submitted without it.
-->

Activities

gauna

2020-12-13 16:28

reporter   ~0015135

Last edited: 2020-12-13 16:28

PR:
https://github.com/FreeCAD/FreeCAD/pull/4136

sliptonic

2020-12-16 00:09

manager   ~0015151

https://github.com/FreeCAD/FreeCAD/pull/4136

Kunda1

2020-12-22 00:48

administrator   ~0015168

FreeCAD master 07e2e8fc

yorik

2022-03-03 13:55

administrator   ~0016946

This ticket has been migrated to GitHub as issue 6113.

Issue History

Date Modified Username Field Change
2020-10-12 17:23 sliptonic New Issue
2020-10-12 17:52 sliptonic Summary Engrave 'start at vertex' gives wrong path => [PATH] Engrave 'start at vertex' gives wrong path
2020-10-12 17:57 sliptonic Project FreeCAD => Path
2020-12-13 16:28 gauna Note Added: 0015135
2020-12-13 16:28 gauna Note Edited: 0015135
2020-12-16 00:09 sliptonic Assigned To => sliptonic
2020-12-16 00:09 sliptonic Status new => resolved
2020-12-16 00:09 sliptonic Resolution open => fixed
2020-12-16 00:09 sliptonic Note Added: 0015151
2020-12-22 00:48 Kunda1 Note Added: 0015168
2021-02-06 06:33 abdullah Target Version => 0.20