0003681: Valid profile validation at sketch exit

ID	Project	Category	View Status	Date Submitted	Last Update

0003681	Sketcher	Feature	public	2018-11-11 05:34	2020-11-09 18:09

Reporter	abdullah	Assigned To	abdullah
Priority	normal	Severity	minor	Reproducibility	N/A
Status	assigned	Resolution	open
Product Version	0.18
Target Version	0.20

Summary	0003681: Valid profile validation at sketch exit
Description	Work out a final check on exit, in order to get confirmation on exiting edit mode that the user intends to have an "open" profile. Rationale: - 99% of the profiles must be extrudable - 1% may be open, like paths to sweep. Benefit: - Increase productivity by avoiding to have to come back to the Sketcher. - Better detection of bugs relating to closed profiles that are not so detected.
Tags	No tags attached.

FreeCAD Information

Date Modified	Username	Field	Change
2018-11-11 05:34	abdullah	New Issue
2018-11-11 05:34	abdullah	Status	new => assigned
2018-11-11 05:34	abdullah	Assigned To	=> abdullah
2018-11-11 06:21	abdullah	Relationship added	related to 0003682
2018-12-23 02:09	luchete80	Note Added: 0012333
2020-05-31 09:18	chrisb	Relationship added	related to 0003438
2020-11-09 18:09	abdullah	Target Version	0.19 => 0.20

related to	0003682	assigned	abdullah	Sketch Analysis new tests
related to	0003438	assigned	abdullah	Show in Sketcher if the sketch is closed

luchete80 2018-12-23 02:09 reporter ~0012333	Hi, i think this could be shown by darkening the profile one is closed, like in new solidworks versions. Just an idea. I'm begining to study source in order to try to do at least something about it. Regards!