View Issue Details

IDProjectCategoryView StatusLast Update
0003480PathBugpublic2020-10-16 17:10
Reportersliptonic Assigned Tosliptonic  
PrioritynormalSeveritymajorReproducibilityalways
Status closedResolutionfixed 
Product Version0.18 
Target Version0.19 
Summary0003480: Lead in/out dressup produces poor paths on operations with multiple start points.
DescriptionAn operation like face profile can process both the external profile and the internal holes. The cutter must raise up, rapid to another position and descend again. In these cases, the paths produced are messy and usually not workable.
Steps To ReproduceModel a flat part with an internal hole larger than the desired tool.
Create a job, select the top face and create a 'profile based on faces' operation.
Tick the option to process holes.
Verify that a path is created.
Select the path and apply the lead in/out dressup.
TagsNo tags attached.
FreeCAD Information

Activities

sliptonic

2019-01-22 05:02

manager   ~0012486

The original developer of this dressup passed away this year. No one has stepped up to maintain the code or resolve issues. I'm pushing this to 0.19 in hopes it gets addressed.

sliptonic

2020-10-16 17:10

manager   ~0014893

This appears to be resolved by an earlier PR. Creating a pad with a hole, adding a new profile operation processing inside holes and circles and then dressing up with a new leadinout dressup yields a proper path.

Issue History

Date Modified Username Field Change
2018-05-16 21:28 sliptonic New Issue
2019-01-22 05:02 sliptonic Status new => acknowledged
2019-01-22 05:02 sliptonic Target Version 0.18 => 0.19
2019-01-22 05:02 sliptonic Note Added: 0012486
2020-10-16 17:10 sliptonic Assigned To => sliptonic
2020-10-16 17:10 sliptonic Status acknowledged => closed
2020-10-16 17:10 sliptonic Resolution open => fixed
2020-10-16 17:10 sliptonic Note Added: 0014893