View Issue Details

IDProjectCategoryView StatusLast Update
0003451PathFeaturepublic2019-01-22 03:41
Reportersliptonic Assigned Tosliptonic  
Status closedResolutionfixed 
Product Version0.18 
Target Version0.18 
Summary0003451: Need method for working on a partial profile.
DescriptionA method is needed to be able to remove material from one area of the stock profile without doing a complete profile/contour operation.
There are at least two situations requiring this:
1) The user has clamped the part on the table and only wishes to machine a couple faces without profiling the entire part. For example, machining one face of a casting.

2) The profile of the part involves a very deep recess that should be cleared from the outside in rather than with 100% cutter engagement as the cutter plows through and cuts out a chunk of stock.

The current workaround is for the user to create a 'helper object'. then creating a job for that object and adding appropriate operations.

At a minimum this process could be automated to create the helper object seamlessly in the background and use its shape for the operation.
TagsNo tags attached.
FreeCAD Information



2019-01-22 03:40

manager   ~0012480

The deburr and engrave operations can now work on open wires. This is not a perfect solution but works well enough for now. Closing this issue and will re-open if specific use cases are presented that aren't served by deburr and engrave.

Issue History

Date Modified Username Field Change
2018-05-02 20:09 sliptonic New Issue
2018-05-02 20:09 sliptonic Status new => assigned
2018-05-02 20:09 sliptonic Assigned To => sliptonic
2019-01-22 03:40 sliptonic Note Added: 0012480
2019-01-22 03:41 sliptonic Status assigned => closed
2019-01-22 03:41 sliptonic Resolution open => fixed