View Issue Details

IDProjectCategoryView StatusLast Update
0003288SketcherBugpublic2018-01-01 19:53
Reporterpaullee Assigned Towmayer  
Status closedResolutionfixed 
PlatformFedora 27OSlinuxOS Version4.14.7-300.fc27.
Product Version0.17 
Target Version0.17Fixed in Version0.17 
Summary0003288: Sketch Angle Constraints Wrong Reference Reading
DescriptionForum Thread

There are a few angle Constraints in the sketch below as reference.

A point move around and the angles update as reference.

At some particular cases, see screencapture for the one captured, a reading return 11.76 deg though it is apparently 2 lines bigger than 90 degrees.
[It report the complementary angle i.e.,-ve (180 - correct angle) ]

The reference provide wrong reading frustrate subsequent calculation / expression.

Interestingly, when the file is untouched and re-opened, it reads (I am not sure if re-opening the sketch w/o closing the file do the same thing) -168.xx degree which is the correct reading.

OS: Linux
Word size of OS: 64-bit
Word size of FreeCAD: 64-bit
Version: 0.17.12852 (Git)
Build type: None
Branch: master
Hash: 8e3b2d7e84924444bc219133a7e0bbd07413cf4f
Python version: 2.7.6
Qt version: 4.8.6
Coin version: 4.0.0a
OCC version: 7.1.0
Locale: English/UnitedStates (en_US)

Steps To ReproduceAs described above.
Additional InformationSomething related to
Your text to link here...
TagsNo tags attached.
FreeCAD Information

Issue History

Date Modified Username Field Change
2017-12-24 14:57 paullee New Issue
2017-12-24 14:57 paullee File Added: Test _ Sketch _ Angle Constraint Puzzle.fcstd
2017-12-24 16:17 Kunda1 Status new => confirmed
2017-12-24 16:17 Kunda1 Description Updated View Revisions
2017-12-24 16:17 Kunda1 Target Version => 0.17
2018-01-01 18:24 abdullah Note Added: 0010652
2018-01-01 19:53 wmayer Assigned To => wmayer
2018-01-01 19:53 wmayer Status confirmed => closed
2018-01-01 19:53 wmayer Resolution open => fixed
2018-01-01 19:53 wmayer Fixed in Version => 0.17
2018-01-01 19:53 wmayer Note Added: 0010654