View Issue Details

IDProjectCategoryView StatusLast Update
0003099PathFeaturepublic2019-01-23 00:51
ReporterKonstantin Assigned Tosliptonic  
PrioritynormalSeverityfeatureReproducibilityN/A
Status acknowledgedResolutionopen 
Product Version0.18 
Target Version0.19 
Summary0003099: Tapping
DescriptionI want Tapping tool.
  • I see an ability to add a tap in Tool Table, but there's no Pitch option.
  • There's a few commaands for rigid tapping:
    • Tapping cycle (mostly G84)
    • Counter tapping cycle (on some machines G84 with M4, on my Fanuc G74, maybe others commands used to, not shure)
    • Peck tapping (on some controllers only need to add Q depth to G84, on some used different command)
    • Counter peck tapping (same as previous)
  • On some controllers F is a pitch of a tap, on some it must be set as S*pitch. So, there must be an option for that in Postprocessor.
TagsNo tags attached.
FreeCAD Information

Activities

Kunda1

2017-06-28 21:45

administrator   ~0009582

Changed to 'Feature'

Kunda1

2017-07-22 09:57

administrator   ~0009792

Related forum thread: https://forum.freecadweb.org/viewtopic.php?f=15&t=23127&start=10#p183405

sliptonic

2017-11-28 00:36

developer   ~0010482

feature moving to 0.18 version target

Kunda1

2019-01-23 00:51

administrator   ~0012498

bumped to 0.19

Issue History

Date Modified Username Field Change
2017-06-24 10:28 Konstantin New Issue
2017-06-28 21:45 Kunda1 Reproducibility have not tried => N/A
2017-06-28 21:45 Kunda1 Category Patch => Feature
2017-06-28 21:45 Kunda1 Note Added: 0009582
2017-06-28 21:45 Kunda1 Product Version => 0.17
2017-07-22 09:57 Kunda1 Note Added: 0009792
2017-11-28 00:36 sliptonic Product Version 0.17 => 0.18
2017-11-28 00:36 sliptonic Note Added: 0010482
2019-01-23 00:46 sliptonic Assigned To => sliptonic
2019-01-23 00:46 sliptonic Status new => acknowledged
2019-01-23 00:46 sliptonic Target Version => 0.19
2019-01-23 00:51 Kunda1 Note Added: 0012498