0002795: Allow cherrypicking individual lines from a sketch when creating a wall

ID	Project	Category	View Status	Date Submitted	Last Update

0002795	Draft	Feature	public	2016-11-26 18:57	2021-02-06 06:45

Reporter	TomV	Assigned To	yorik
Priority	normal	Severity	minor	Reproducibility	have not tried
Status	assigned	Resolution	open
Platform	Linux	OS	Ubuntu	OS Version	16.0
Product Version	0.17
Target Version	0.20

Summary	0002795: Allow cherrypicking individual lines from a sketch when creating a wall
Description	My current (noob) workflow is as follows: 1. create a single monster sketch with the floorplan of my house 2. then draw draft rectangle over the sketch lines to specify walls 3. then convert those draft rectangles into a wall It's not possible to select lines from the sketch directly, which makes step number 2 necessary. If you select a single line from the sketch and then press 'wall', all lines of the sketch are converted into a wall. My RFE is to make it possible to specify select lines from a sketch.
Steps To Reproduce	N/A
Tags	No tags attached.

FreeCAD Information

Date Modified	Username	Field	Change
2016-11-26 18:57	TomV	New Issue
2016-11-29 14:14	yorik	Note Added: 0007498
2016-11-29 14:14	yorik	Assigned To	=> yorik
2016-11-29 14:14	yorik	Status	new => assigned
2018-01-12 15:31	yorik	Target Version	=> 0.18
2019-02-14 23:50	yorik	Target Version	0.18 => 0.19
2021-02-06 06:45	abdullah	Target Version	=> 0.20

yorik 2016-11-29 14:14 administrator ~0007498	That could be a good thing indeed. Will try to think a bit about how to do it (users must be able to pick the whole object as well)