View Issue Details

IDProjectCategoryView StatusLast Update
0002526FreeCADFeaturepublic2020-10-07 23:51
Reporterollydbg Assigned To 
PrioritynormalSeverityminorReproducibilityalways
Status newResolutionopen 
Summary0002526: Add an option to show or hide the seam edges for the 3D view
DescriptionWe need to add an option to filter out the seam edges and only shows the non-seam edges in the render output or the 3D view. But I still need to let the non-seam edges shown.

To get an screen shot of the 3D view which can be used as a technical drawing(I would like to put the drawing in some papers or books), the seam lines are not needed from my point of view.

See our discussion here in the forum: https://forum.freecadweb.org/viewtopic.php?f=3&t=14022
Steps To ReproduceIt is very simple to see the seam line, just add a cylinder from the Part workbench, and you will see a straight line on the face, this is the seam edge.
TagsBountysource Potential, Coin3d, OCC Bug, seam, UI, upstream
FreeCAD Information

Activities

Kunda1

2019-05-09 11:14

administrator   ~0013088

Last edited: 2019-07-30 00:23

View 3 revisions

Beside the above thread ( https://forum.freecadweb.org/viewtopic.php?f=3&t=14022 ) there is further discussion also at https://forum.freecadweb.org/viewtopic.php?f=24&t=36223&p=306787#p306743

Loft-seam-issue.png (57,942 bytes)   
Loft-seam-issue.png (57,942 bytes)   

Kunda1

2019-07-30 00:22

administrator   ~0013393

Yet another discussion on this topic: https://forum.freecadweb.org/viewtopic.php?f=3&t=29337

Kunda1

2020-05-06 11:29

administrator   ~0014403

Another discussion: https://forum.freecadweb.org/viewtopic.php?f=3&t=46081

openBrain

2020-05-06 16:45

developer   ~0014404

@Kunda1 : I'm not sure this is really same thing. This ticket is only about being able to not display seams. Nothing more. The last topic you mentioned is more about geometric issues with seams (there are quite a lot, AFAIK all are actually OCC things). ;)

Issue History

Date Modified Username Field Change
2016-04-28 04:04 ollydbg New Issue
2017-03-02 18:04 Kunda1 Tag Attached: OCC Bug
2017-03-02 18:04 Kunda1 Tag Attached: seam
2018-01-26 22:01 Kunda1 Summary Add an option to show of hide the seam edges for the 3D view => Add an option to show or hide the seam edges for the 3D view
2018-01-26 22:03 Kunda1 Tag Detached: OCC Bug
2018-01-26 22:14 Kunda1 Tag Attached: Coin3d
2018-09-04 13:53 Kunda1 Tag Attached: UI
2019-05-04 17:28 Kunda1 Tag Attached: Bountysource Potential
2019-05-09 11:14 Kunda1 File Added: Loft-seam-issue.png
2019-05-09 11:14 Kunda1 Note Added: 0013088
2019-07-30 00:22 Kunda1 Note Added: 0013393
2019-07-30 00:22 Kunda1 Note Edited: 0013088 View Revisions
2019-07-30 00:23 Kunda1 Note Edited: 0013088 View Revisions
2019-07-30 00:23 Kunda1 Description Updated View Revisions
2020-05-06 11:29 Kunda1 Note Added: 0014403
2020-05-06 16:45 openBrain Note Added: 0014404
2020-10-07 23:51 Kunda1 Tag Attached: upstream
2020-10-07 23:51 Kunda1 Tag Attached: OCC Bug