View Issue Details
|ID||Project||Category||View Status||Date Submitted||Last Update|
|0002091||Robot||General||public||2015-05-06 23:09||2020-09-27 16:37|
|Summary||0002091: 3D printer simulator - a new nodekit?|
|Description||I tried understanding how the robots example works, but as a newbie the number of external references is daunting.|
I want to create a 3D printer model in freecad that shows a delta printer, although any other printer would help, but I'm using delta printer terms below.
Its shows its print volume - the area it can 3D print in, in a different color.
There are a couple of sliders to change:
Delta arm length: affects print volume width+height
Linear actuator length: affects print height, required linear bearings diameter
Base radius: affects print area
Delta arm distance: affects actuactor dimensions (the actuator is connected by 3 arm-pairs) which affects the print volume width
It looks like the 6-axis robot model was developed outside of freecad, but it would be great if such models could be developed, edited and shared through freecad!
|Tags||No tags attached.|
Something like http://www.thinkyhead.com/_delta/
but with a translucent print volume with some sliders.
||Interesting developments in the Path WB: https://forum.freecadweb.org/viewtopic.php?f=10&t=24923&p=196416#p196414|
This is not sketcher related.
Do we need a robot WB project?
||Okay I added a Robot subproject.|
|2015-05-06 23:09||philius||New Issue|
|2015-05-07 11:12||philius||Note Added: 0006124|
|2017-10-23 18:35||Kunda1||Note Added: 0010344|
|2017-12-19 13:36||abdullah||Note Added: 0010620|
|2017-12-19 14:39||Kunda1||Note Added: 0010621|
|2017-12-29 13:56||wmayer||Project||Sketcher => FreeCAD|
|2018-01-05 19:34||yorik||Note Added: 0010710|
|2018-01-05 19:35||yorik||Project||FreeCAD => Robot|