0004194: [Bug] Can't resize inner windows when a stylesheet is selected. 0003626: [Bug] OpenSCAD causes Multifusion failed with some empty translates 0003768: [Bug] Losing Origin and/or Geofeatures 0004232: [Bug] Recompute failed (SIGSEGV) after editing a cell in a spreadsheet 0003808: [Bug] "2nd length" in "Pocket parameters" shows wrong value when a negative f(x) was defined 0004104: [Bug] Void property value defaults to 1 (wmayer) 0004421: [Patch] Part.CompoundTools.Explode.explodeCompound access a property of a sometimes null object with an error (Kunda1) 0004381: [Bug] OpenSCAD WB icon missing in 2 scenarios (wmayer) 0003991: [Bug] freecad app window not placed properly on screen 0004355: [Bug] When exporting, an unreadable STEP file is created (wmayer) 0003704: [Bug] AMF exporter preferences are not shown in Preferences 0003498: [Feature] Preference categories not showing up if specific workbench has not been visited

0004263: [Bug] Problem with negative offset "Placement" when the preference are "Building US" units 0004083: [Bug] A bug in the Coin3D library causing app to crash on RPi4 (Upstream Raspbian libs need updating) 0004041: [Bug] Navigation cube hardcoded to use Helvetica 0000597: [Feature] New feature naming convention 0001352: [Bug] DOS line endings makes applying patches on Linux really hard 0003625: [General] Incomplete Wiki Pages to be completed before next release       0003641: [General] DAGview documentation needed 0003907: [Feature] Manipulating groups in treeview usability improvement 0004288: [Feature] Better Error message for No active body 0001208: [Feature] Parts Appear as Shells Instead of Solids When Viewed by Clipping Plane 0004352: [Bug] CMake Install process needs revamping 0004443: [Feature] Safe Mode (ala LibreOffice) that offers comprehensive options to deal with user config files 0004508: [Bug] Grouping problem (object disappearing after drag drop into group) 0001181: [Feature] Adding an option to fill a the surface with image or other methods to show a thread-like shape 0004084: [Bug] placement within a body breaks after a clone from non origin position 0003924: [Bug] Text (Annotation) moves greatly when placement edited. 0004332: [Bug] Thickness limitation on curved geometry 0004521: [Feature] When joining a polygon to the end of an arc a tangent is implied 0000798: [Feature] Allow to redefine the standard views 0000850: [Feature] Write own and better version of BRepFeat_MakePrism 0001089: [Bug] Robot Tools are not correctly placed when robot has another placement 0001095: [Feature] Free Flight View (inspection Tool) 0001347: [Feature] Reduce Rendering Time of Complex Objects 0001391: [Feature] Allow editing of multiple sketches at the same time 0001415: [Feature] Multi core/thread support 0001587: [Feature] Sweep On Multiple Paths 0001666: [Feature] Respect symbolic links 0001699: [Feature] Allow Wrapping of 2D Objects, Draft ShapeString, Onto Non-Linear Surfaces 0001968: [Feature] importDXF (v1.38) how to change DXF export format 0002022: [Feature] Profile shift for involute gear 0002077: [General] Assembly Merge: update tree view upon active object change 0002173: [Feature] Pythonic vs. non-pythonic 0002410: [Feature] Set Visibility/Invisibility of object that requires manual intervention (not simply Space bar) 0002794: [Feature] enable "document window" (flat lines, wireframes, points, shaded) for keyboard shortcuts 0002966: [Feature] Rotate View on Screen 0003039: [Feature] Importer for Autodesk Inventor files 0003069: [Feature] Persistent Clipping Plane 0003092: [Feature] Rescaling sketch at first dimensional constraint 0003183: [Feature] Graceful handling of self-intersections when creating part from imported mesh 0000573: [Feature] Macro editing FCMacro file - 4 improvements 0001778: [Feature] side-by-side and top-and-bottom stereo modes 0001792: [Feature] Move Export 3D SVG From Export To Tools Menu 0002039: [Feature] Use default selection for exports 0002686: [Feature] Container for points, lines, planes and surfaces 0002715: [Feature] The result for fillet of the union of cube and sphere is wrong 0003072: [Feature] Please add a function exportDXF to TopoShape 0003219: [Feature] [proposal] Add option to disable turntable rotation constraint 0003268: [Feature] [feature] surface cleaner or smooth surface tool (e.g. Mesh WB's "close holes") 0003290: [Feature] Port PySide imports to pyqt-abstraction-layer 0003305: [Feature] QGIS + Civil Engineering integration in to FreeCAD 0003395: [Feature] Turn vertex into 3D spheres with gradient coloring for optimal identification 0003397: [Feature] Permit Linear pattern feature to follow guide curves 0003399: [Feature] Implement dimension tool 0003400: [Feature] Enable showing planes from model body 0003405: [Feature] Permit users to select any closed contour within a sketch 0003414: [Feature] Add "X-Ray" display mode 0003594: [Feature] DXF Export Units Toggle 0003637: [Feature] At FreeCAD startup; Add options to change the initial camera view and window size in Sketcher. 0003710: [Feature] Placement should remember "Apply incremental changes" checkbox setting 0003760: [Feature] Feature: Errors in sketches could be propagated up the tree 0003772: [General] Base::Console().Warning() Color almost unreadable on status bar with standard color theme 0003798: [Feature] Improve the "Sketch select" dialog of the "Map a sketch to a face" commando 0001240: [Feature] Welding WB (which also includes Technical drawing symbols) 0002869: [Feature] IPython / Jupyter support 0003157: [Feature] Expose makeLoft smoothing algorithm, max degree, and parametrization type to the user. 0003254: [Feature] Wrong paths to fonts occur when you exchange models between different systems. An 'Embed' option would be useful 0003304: [Feature] Integrate Inkscape in to FreeCAD 0003446: [Feature] a python method to convert a Shape into a point cloud without extra dialog but parameter 0003920: [Feature] change orientation views related to XYZ planes 0003947: [Bug] Part-Container: Moved Part-Container do not effect contained objects 0003948: [Bug] Part-Container: Moved Part container with objects, shapeblinder links to nothing 0003966: [Feature] Support switching the inputfield unit scheme per control explicitly in Python 0003999: [Bug] Toolbars get disabled on file open if 'Close & switch on opening file' is enabled 0004002: [Feature] [Feature Request] Revit rotation stop on Scroll Release 0004046: [Bug] Implementation flaw in View/Show all objects 0004115: [Feature] [Feature Request] Ability to change the Crosshair color 0004133: [Bug] Sometimes face / sketch exports to flattened svg or dxf incorrectly 0004142: [Feature] Start WB could report more details when highlighting an FCStd file 0000897: [Feature] Map a 2D image onto the face of a 3D object 0004172: [Feature] Add a new option to sketcher preferences, "Maintain camera position while editing" 0004176: [Feature] Add options to have entire property tree expanded by default instead of collapsed in Properties pane 0004202: [Feature] Working points, lines and planes 0004203: [Feature] Loft improvement - PartDesign 0004204: [Feature] BlendCurve - need it to accept ANY point / line as an argument 0004238: [Feature] Decide on the function of system.cfg 0004240: [Feature] 3D polyline with separate radii on each "corner" 0004249: [Feature] Move versus edit objects 0004268: [Feature] Multi-Geometry Modal Selection and Deselection 0004314: [Feature] Add visual orientation while creating datum plane 0004315: [Feature] FEM WB, WarpVector widget default position from Right to Left 0004329: [Feature] [Feature Request] Table Object 0004338: [Bug] Working Plane Proxy neglect Automatic Working Plane 0004339: [Bug] auto working plane neglect Left/Right rotation 0004342: [Bug] grouped buttons conflict in customized toolbar 0004348: [Bug] FreeCad will crash on startup if using X.Org Nouveau display driver 0001417: [Feature] Half width tangential lines 0003398: [Feature] Hiding / Showing features hides entire body 0004020: [Bug] untrapped file error on start up. 0004048: [Feature] Linear and Polar Transform Tools apply the wrong failure criteria to Transforms and needlessly fail 0004090: [Feature] Provide direct access to task panel dialog from Python 0004154: [Bug] Parametric constraint can be changed only one way for fully constrained sketch 0004307: [Bug] toolbar icons and other UI elements seem to disappear from screen ie. do not render when restoring app on macos 0004341: [Bug] shape flipped when Auto Working Plane and Bottom view 0004351: [Feature] gui font sizes are very small on a large screen (High DPI) (how to fix) 0004397: [Bug] Extensions module directory lacking from module paths on startup 0004415: [Bug] Toolbar-only command must be visible for custom shortcut to work 0004438: [Feature] Flippin' direction of line / curve 0004446: [Bug] Fullscreen renders nothing 0004469: [Feature] consistant unit usage 0004482: [Feature] Create point on plane while at the same time beeing connected to another point in/on the same plane. 0004499: [Bug] Can't save color 0004502: [Feature] Automate Link and ShapeBinder 0004506: [Feature] Make it possible to copy items like bodys, primitives, solids, partgroups, sketches etc directly into partgroups, groups, comp. 0002526: [Feature] Add an option to show or hide the seam edges for the 3D view 0003786: [Feature] Ability to cycle between selectable objects (using a keyboard shortcut) 0004265: [Bug] Undo doesn't restore the state as it was before opening a transaction (realthunder) 0004350: [Bug] Pad or Pocket of ShapeString in Part Design causes BOPcheck to abort (OCC bug) 0004375: [Feature] Do not add files to the recent list on import or export 0004403: [Feature] import PRC file or 3D PDF into FreeCAD 0004475: [Bug] Thumbnail creation sometime fails. 0004511: [Bug] AppImage update fails with python error in report view 0004537: [Bug] Export GCode - 'PrimitivePy' object has no attribute 'Proxy' error message 0004542: [Bug] missing libqhull_p.so.7 in AppImage (x86_64) 0004383: [General] Documentation: Sweep: Include "attach it to the path" step. 0004491: [Bug] In French version Preferences vanish on MacOS (chrisb) 0004274: [Bug] FreeCAD zooms the viewport automatically Out making the interface unusable. 0004520: [Bug] Doubleclick when drawing a polygon seems to results in an unresolvable double point. (chennes) 0003795: [Feature] Input of floating point values with point ('.') instead of comma (',') (openBrain) 0003956: [Bug] Possible conflict between QT and Opengl, titlebar overlaps menubar (chennes) 0004363: [Feature] Frozen views are not stored in the project 0004450: [Bug] When running FC 0.19 on Windows 7, it returns errors in the Report window 0003725: [Bug] Changing of the transparency parameter on Radeon GPU 0003922: [Bug] Preferences, General, Units, user system MKS(m/kg/s/degree) displaying dimensions as millimetres and not metres 0004323: [Bug] Import of any .dae (Collada)-file fails 0001589: [Feature] Points, curves and surfaces 0003554: [Bug] fillet fails on cut torus 0003741: [Bug] [macOS] Wrong coordinate calculation / visualisation when using Retina display 0003994: [Bug] zoom unstable 0004073: [Bug] [MacOSX Catalina] Unable to save (most likely due to security permissions) 0002821: [Patch] IDF Import of Step Models 0004091: [Bug] create links of a selected object along selected path 0004313: [Feature] Set "Maximum number of backup files" default to a larger number 0004333: [Bug] Application defaults to display port dock instead of embedded graphics - causes empty editor screen without error notification 0004364: [Feature] Quick switch to a local part view 0002688: [Feature] Model Presentation Workbench 0004346: [Feature] Resolving FreeCAD stalls when creating mesh from complex objects 0004354: [Bug] Native run on wayland? 0004447: [Bug] Datum (whatever dimension) mm for the constraint with index (whatever constraint) is invalid. 0004509: [Bug] round pocket exports as a hexagonal pocket in obj format. Is filled in solid in stl and 3mf formats. There is no gco export. (Kunda1) 0004527: [Bug] TechDraw page layout screwing up 0004311: [Bug] Crash on a loft command with incorrect input (OCC bug) 0000019: [Feature] Resource framework for FreeCAD 0000005: [Feature] Navigator 0001141: [Feature] Honeycomb, internal bone structure and bamboo 0002024: [Bug] Boolean -> Difference leaves a extra hole (upstream OCC bug) (shoogen) 0000336: [Feature] Add a feature recognition tool 0001858: [Bug] Loft tool incorrect result with rotated ellipses (Upstream OCC bug) (shoogen) 0002437: [Feature] Trackpad navigation on mac does not use full capabilities of the trackpad       0003995: [Bug] Trackpad on Macbook unusable in any mouse model so far 0000402: [Feature] Switch on and off parametric behaviour of document objects 0000477: [Feature] Proper interface for edit modes of view provider 0004470: [Bug] Crash on loft with twisted circles. 0001840: [Bug] Fillet after thickness gives invalid geometry (upstream OCC Bug) 0001570: [Bug] Part sweep bug with acute angle (Upstream OCC bug) 0003923: [Feature] TreeView widget, reorder the object in tree view by user 0004474: [Feature] Ghost tabs within Preferences dialog to indicate menus that are available but not activated 0004217: [Bug] Simple perf improvement: avoid 'if somekey in mydict.keys()' (chennes) 0003796: [Bug] Shortcuts "V1" .. "V7" to change the "Draw-Style" didn't work in sketch view (abdullah) 0004683: [Bug] Mac Delete button (Backspace) is not recognized within Tools->Customize->Keyboard, only in combination with Fn button 0004454: [Feature] DXF files open with wrong line thickness. Resaving lost thickness information 0000495: [Bug] Inconsistent translations for workbench names 0002961: [Bug] BRepOffsetAPI_MakePipeShellPy.setAuxiliarySpine problems 0003073: [Feature] "Labels & Attributes" tree mix-up randomly elements 0001818: [Bug] Bool Op representation error 0003536: [Bug] Sketcher Issue while using Windows high constrast mode 0003904: [Bug] Draft _ Delete objects while command is active 0003673: [Bug] HIDPI related bug where text doesn't fit grey box in "Documents" when the software starts. 0003740: [Bug] [macOS] Editing item by double-clicking opens other project window 0003990: [Bug] Placement dialog fails after click on 3d view 0003744: [Bug] Open file dialog freezes the laptop for several minutes (approx. 2 min) <-- Due to missing Code Signing 0004178: [Bug] Part Design auto-generated Body not placed under existing Part 0004180: [Bug] [regression] DXF export option "project exported objects along current view direction" no longer working 0003081: [Feature] MacOS application crashes should generate Diagnostic Reports 0004423: [Bug] qwindowsvistastyle.dll does not style the line color 0004431: [Bug] Crash after editing Part Design feature links with DAGView active 0004452: [Bug] Zoom with mouse wheel is broken 0002041: [Bug] FreeCAD warns when applying thickness "BRepAlgo_Image::Bind" 0003494: [Bug] DXF export (Autodesk DXF 2D type) doesn't add any UNITS field inside the dxf file. 0004186: [Bug] hang on union of objects 0004275: [Bug] [OCC/Coin] Rendering issue with large coordinate values 0004206: [Bug] Transparency display lost on multicolored object when reloading file (chennes) 0004269: [Feature] Allow user specified line thickness for SVG export (chennes) 0001294: [Feature] Configure light sources (wmayer) 0000922: [Feature] Topological Naming (realthunder)       0002462: [Feature] Manage Object Display Order in Tree View 0000069: [Feature] Python debugger (wmayer) 0000857: [Feature] Split package into smaller ones. (wmayer) 0001901: [Feature] Add MSAA 6x option (ickby) 0000494: [Feature] Objects names in Label & Attributes Tree View should be translatable (wmayer) 0000503: [Feature] Measurement framework (wmayer) 0001954: [Bug] Set colors doesn't work on objects that have edit mode reimplemented (wmayer) 0001971: [Feature] Boolean Operations With Multiple Arguments (wmayer) 0001967: [Feature] Fuzzy Boolean Operations (shoogen) 0002927: [Bug] Mac application bundler doesn't track library versions (ian.rees) 0004014: [Bug] Build number & hash are no more available on daily build (Linux) (sgrogan) 0004120: [Feature] Improve tooltips for the FC preference panel (make them more verbose) using the content from the wiki (Kunda1) 0002738: [Feature] Provide Hash source installation (sgrogan) 0003420: [Bug] SVG imports from inkscape lead to wrong dimensions (yorik) 0003758: [Feature] Sign AppImages (triplus) 0003789: [Bug] Fix movement of children of Arch objects (yorik) 0004401: [Feature] FEM: Viewing mixed meshes (berndhahnebach) 0004402: [Feature] scientific notation for displaying numbers (wmayer) 0003353: [Feature] Direct modeling tools (yorik) 0003393: [Feature] Configuration wizard when launching FreeCAD for the first time 0004531: [Bug] homebrew does not have a beer (vejmarie) 0001756: [Feature] Show all currently assigned Keyboard Shortcuts with commands as list (wmayer) 0003960: [Bug] freecad help broken in ubuntu appimage (looo) 0003963: [Bug] Only alpha comma key can be used as decimal separator (openBrain) 0004445: [Bug] FreeCAD menus and buttons very slow (Linux version) on ChromeOS (GPU Acceleration must be enabled) (Kunda1) 0003310: [Bug] Application crash when adding a fillet on an edge (SIGSEGV) (Target OCC7.5) (chennes) 0004524: [Bug] FreeCAD_0.19-23546 does not start on MacOS (Big Sur) (vejmarie) 0004291: [Bug] Freecad crashes when creating filet (chennes) 0004078: [Bug] Crash when applying a fillet on a arc. (chennes) 0004076: [Bug] Freecad crashes when using Part Design Chamfer tool on a feature. (chennes) 0004543: [Bug] FreeCAD crashes when OCC fails with fillets and chamfers (chennes) 0004517: [Bug] Units entry missing from .dxf file export. (yorik) 0004495: [Bug] Navigation cube is not clickable at its edges and corners (uwestoehr) 0004515: [Feature] Preferences folder misused in Mac version (chrisb) 0001626: [Feature] Transparency not respected when highlighting (chennes) 0004098: [Bug] FreeCAD should not exit if unable to rename backup file to project file while exiting (wmayer) 0002397: [Feature] Select All Children of Object in Tree View of Combo View (uwestoehr) 0003207: [Feature] Distinguish for Points in Sketcher between Construction mode and non construction mode (chrisb) 0002956: [Feature] wishlist: use $XDG_DATA_HOME/freecad for system.cfg and user.cfg (wmayer) 0002396: [Feature] Make Utility sub-menu available in all workbenches (yorik) 0004739: [Bug] Launch from Windows installer fails to drop privileges (uwestoehr) 0004733: [Feature] Add the ability to test the translation from Crowdin in the FreeCAD interface on Windows OS (chennes) 0004436: [Bug] Points_Structure command does not work properly 0004504: [Bug] 0.18.5: addon manager still hangs (Kunda1) 0004536: [Bug] Export file - name (chennes) 0003930: [Bug] Hard Crash when discarding the formula editor on a scaled object 0003869: [Bug] Start page content appears in the background of the workbench when "simple" color is selected for the background 0004072: [Bug] Addon manager python exception and lockup (module 'git' has no attribute 'Repo') (yorik) 0003844: [Bug] PVS: The pointer was not released in destructor. A memory leak is possible. (wmayer) 0004430: [Bug] Mesh_BuildRegularSolid: parametric mesh props have no units in Property editor (wmayer) 0004081: [Feature] Abillity to show console output when running under Python (wmayer) 0004297: [Bug] invalid syntax in opening document 0004546: [Bug] add a material in Arch Wb error (realthunder) 0004353: [Bug] parameters of rotate_extrude in CSG files and openscad workbench are ignored (chennes) 0003896: [Feature] Dependency Graph: Panning 0004321: [Bug] Crash program during chamfer (chennes) 0003829: [Bug] External display dropdown menu offset 0003959: [Bug] Created image plane is not proportional to loaded image (wmayer) 0004303: [Bug] Three choices in a Sketcher menu each with the same Ctrl+Shift+E 'address' (wmayer) 0002105: [Bug] The Button To Open Data Tab > Placement Widget Is Not Always Visible (wmayer) 0004405: [Bug] Using PartDesign axis / plane as direction for constraints (wmayer) 0003988: [Bug] the function Import.readDXF doesn't import Bsplines (wmayer) 0000796: [Bug] Sketch of a feature "jumps" to another face after adding/deleting elements from the sketch of its support (realthunder) 0000883: [Bug] Sketch editing corrupts fillet (realthunder) 0000523: [Bug] Fillet Updates is failling! 0004540: [Bug] When manual size of DatumPlane is selected its Length property is not saved to the file and consequently not restored on opening (wmayer) 0004481: [Bug] App.ActiveDocument.ActiveObject is not updated 0004451: [Bug] cant open Openscad file *.scad (keithsloan52) 0004021: [Bug] Gesture Navigation style fires additional events on MacOS (DeepSOIC) 0003738: [Bug] [macOS] Wrong display of icons in toolbar (peterl94) 0004004: [Bug] Skripts funktionieren nicht mehr unter 0.18 0004116: [Bug] Icons on page massive and take up 80% of the work area 0001272: [Bug] BezierCurve is not documented and not intuitive (wandererfan) 0001952: [Feature] feature request for facility to provide files which are downloadable from the Wiki pages 0002135: [Bug] Units module is not properly considering the QLocale::groupSeparator() character 0002303: [Bug] 404 from auto-generated Help > Automatic python modules documentation (wmayer) 0002632: [Feature] Improvements to Prefs for Python 0002844: [General] [Wiki] Debugging instructions missing for OSX (Kunda1) 0002976: [Bug] Outdated info regarding Debian packages on download page (kkremitzki) 0003253: [Bug] set correct links to documentation and bug tracker in man page (Kunda1) 0003555: [General] Tutorial documentations:Creating a simple part with PartDesign (normandc) 0004189: [General] User documentation - Path workbench 0004407: [Bug] Documentation: Problem Part.Wire (yorik)

0002993: [Feature] Check/notification which workbenches have an available update 0004535: [Bug] Addon Manager - no access to Macros on github (chennes) 0003330: [Feature] Add custom/foreign addon via repository URLs in addon-manager (chennes)

0004488: [Bug] Roof Overhang not removed by Arch:Remove Component 0001842: [Feature] Add the capability to communicate as a client with a BIMSie server 0001843: [Feature] Integrate a BIMSie server into FreeCAD 0001844: [Feature] Integrate a client for the buildingSMART Data Dictionary web service 0003248: [Feature] Add option to make Length autofocused when drawing line/walls, so one can indicate a direction with the mouse and type a length 0003289: [Feature] Mirror of Sketch (Arch Section Plane) not Shown in TechDraw / ArchView 0003802: [Feature] aggregative function in the Schedule value field 0003909: [Bug] Arch remove does not work correctly for creating subtractions/holes 0004370: [Bug] Duplicated window object when using expression with wall width 0004404: [Bug] Space object doesn't work with non-convex models 0004516: [Bug] Arch Space, showing wrong "Line Spacing" in 3d-View 0004317: [Bug] Draft grid visible through an arch wall 0004210: [Bug] Impossible to export a PartDesign Body (yorik) 0004593: [Bug] [Arch] Arch Stairs' rails do not recompute in FC 0.19 0003208: [Bug] Wall additions can not be set to auto (floor height). 0003882: [Bug] Add and subtract in Arch workbench don't follow object selection order 0004418: [Bug] osx line width not getting wider 0001823: [Bug] Working plane not reset under Arch when making new project (yorik) 0002584: [Feature] Support for SweetHome3D xml-based files (yorik) 0000515: [Feature] Arch module - Auto dimension tool (yorik) 0002356: [Feature] Add a set of structural nodes tools (yorik) 0002448: [Feature] Support for IfcProfileDef (yorik) 0002543: [Feature] Implement GBXML export (yorik) 0002581: [Feature] Support material properties in IFC (yorik) 0002880: [Feature] Make father walls handle multilayer walls (yorik) 0003228: [Feature] Taper for structural objects (yorik) 0003229: [Feature] Add "fill shape" to Arch sections (yorik) 0003231: [Feature] Export meshes to IFC and handle hi-res objects (yorik) 0003237: [Feature] RCP plan (yorik) 0003238: [Feature] Auto section/elev marks from section plane (yorik) 0003239: [Feature] Room finish marks (yorik) 0003240: [Feature] Door/Window marks (yorik) 0003241: [Feature] Level marks (yorik) 0003243: [Feature] Allow to auto make a Window from solids (auto recreate base wires and extrusions) (yorik) 0003246: [Bug] Fix IV mode in Sketchfab exporter (yorik) 0003664: [Bug] Visibility not preserved after making edits in building tree (yorik) 0003951: [Bug] Floor/Building container don't keep objects hidden (yorik) 0004490: [Bug] Arch Fence broken due to Draft WB refactoring (yorik) 0004548: [Bug] Arch:Stair - Connection issue between landing and second flight (paullee) 0002577: [Feature] Support for hatch patterns (yorik) 0003650: [Bug] Can't add building to site (chennes) 0003495: [Bug] Structure created using RHS preset is not visible in 3D view (yorik)

0001176: [Feature] Add visual indication when long tasks are performed 0002076: [General] Assembly Merge: remove automatic App::Part functionality 0000016: [Feature] Basic Assembly stuff       0000083: [Feature] Assembly group feature 0004145: [Bug] build failure with assembly module enabled 0002265: [Bug] Assembly fixed element (Kunda1) 0002087: [Bug] The Part Design migration needs to be tested and updated to new structure

0004113: [Bug] When Clone is used in Draft/Scale, the cloned part placement is always set to origin whatever is the reference point (yorik) 0003691: [Bug] Draft Scale only scales up but not down 0004243: [Bug] Crash: when using Draft Facebinder

0001980: [Feature] better hatch Pattern presentation for planes not parallel to xy 0001786: [Feature] Change default draft precision to allow planar surfaces from dwire 0001866: [Feature] Extend Draft Trimex tool to change length property of basic Arch Structure object 0002562: [Feature] Add Skew/Shear Angle to ShapeString 0003908: [Feature] Entering text in Arch annotation is confusing and non-intuitive 0004242: [Bug] Crash: when testing Draft Dimension 0004264: [Bug] Constructor from the makeArray Function in the Draft Workbench does not Allow Polar Array 0004382: [Bug] DraftWB, error in Array position when "Link Array" checked off 0003855: [Bug] UI becomes unresponsive when attempting to download and use DXF import libraries (python legacy) 0003483: [Bug] Simple paths cannot be upgraded 0004094: [General] Incorrect behavior of the Label tool in the Draft workspace 0001951: [Bug] Draft workbench preferences snap settings does not use "units" settings (yorik) 0004705: [Bug] [Draft] toolbar is active for all workbenches (yorik) 0003340: [Bug] Massive memory leak in Draft (yorik) 0001367: [Feature] Extend Draft Edit mode to work with 3D shapes (yorik) 0002190: [Feature] Use relative coordinates for changing dimension text position. (carlopav) 0002349: [Feature] Use Units widgets in preferences pages (yorik) 0002795: [Feature] Allow cherrypicking individual lines from a sketch when creating a wall (yorik) 0003235: [Feature] Allow to change Draft Label's target object (yorik) 0003764: [Feature] dxf export units (yorik) 0003817: [Bug] Draft Preferences "Always show the grid" have no effect (yorik) 0003853: [Bug] ShapeString is not editable (yorik) 0003354: [Bug] Draft Clone does not maintain the colours of the original (yorik) 0002488: [Feature] Standard paths issues from import SVG to FreeCAD (yorik) 0003987: [Feature] Label feature doesn't carry out a straight arrow in 3D mode (marioalexis) 0004108: [Bug] Coordinate input not always relative to current working plane 0004278: [Bug] Working Plane Proxy origin hijack nearby object (marioalexis)

0004156: [Feature] [Spreadsheet] Necessarily use of leading '=' to enter an expression (hyarion)

0003272: [General] Failed to parse expression occurs when referencing an alias in an external spreadsheet document 0003466: [Feature] Control objects visibility via expressions and spreadsheets cells 0003487: [Feature] Add ability to copy objects with expressions linked to spreadsheet 0003696: [General] Constraints lose values upon reloading file. 0003839: [Feature] Support to update sketch when changing values in a spreadsheet 0003981: [Feature] Add Expression support to certain fields 0004037: [Feature] rewrite unit handling so that unit prefixes will be recognized 0004192: [Feature] Set an expression with many objects at the same time 0004480: [Bug] Cross-document linking does not update on Recompute 0004325: [General] Strange character after bracket, appear in expression input field for a constraint in sketcher 0003925: [Bug] Negative numbers with multiple units interpeted as expressions 0004031: [Bug] Crash upon solving expression referencing named Constraint 0004196: [Bug] Expression parser does not allow "/" after first member 0002467: [Bug] Expression auto-completer slows down FreeCAD (eivindkvedalen) 0002477: [Bug] Copy of sub objects with expression pointing to a spreadsheet shall not create a new spreadsheet (realthunder) 0002766: [Bug] Expression link is cuting by creating new object (eivindkvedalen) 0003255: [Feature] Use consistent angle measure for expressions (eivindkvedalen) 0003379: [Bug] Certain identifiers (like h, rad) cannot be used as names for constraints for usage in expressions (eivindkvedalen) 0003391: [Bug] Array and dictionary lookup does not work in expressions (realthunder) 0003448: [Bug] Failed to parse expression (eivindkvedalen) 0004119: [Bug] spaces in names cause fail to parse expressions. (realthunder) 0004261: [Bug] Bad behavior when using '°' unit in expressions (realthunder) 0004236: [Bug] Placement.Rotation.Axis in expressions requires multiple recomputes after changes (wmayer)

0004102: [Bug] Contact constraint feature intensive 0003624: [Bug] FEM, GUI, mesh VP, element colors 0003879: [Feature] FEM, vtk result pipeline, drag and drop for filter objects 0003902: [General] Translation: "displacement" in ship.ts and fem.ts have different meaning and need differentiation in the sourcecode 0004060: [Feature] FEM - Export transient FEM results to vtk/vtu for ParaView 0004064: [Feature] Allow to select datums as direction for acting forces 0004366: [Bug] Tube does not show Fixed or Force Constraints 0002981: [Feature] FEM, GUI, constraint force should display units 0004373: [Bug] Crash when create FEM pipeline 0004391: [General] Minor updates to the messages of the Elmer solver-framework 0004408: [Bug] FEM constraints not on part design workbench object when moved using placement 0003050: [Feature] FEM, constraint pressure, make it work on face meshes too. 0002547: [Feature] FEM, GUI, all TaskPanels, input from spreadsheet-Data in expressions 0002934: [Feature] FEM, post processing, results, reaction forces 0002950: [Feature] FEM, GUI, post processing, graphical output of line mesh results 0002969: [Feature] FEM, GUI, mesh VP, faces of all elements should be shown, not only the faces of the volume elements 0003049: [Feature] FEM, mesh, support for meshing quads and hexa element for FEM 0003055: [Feature] FEM, scripting FEM module without the need of adding document objects 0003056: [Feature] FEM, 1D beam analysis example for Start WB and wrong results for 1D beam 0003057: [Feature] FEM, console output, get rid of so much console output 0003126: [Feature] FEM, post processing, results, sectional forces for line and shell meshes 0003375: [Feature] FEM, GUI, constraint force, scale factor 0003614: [Feature] FEM, GUI, mesh VP, highlight selected elements of a FEM mesh 0003615: [Feature] FEM, post processing, integrate glyph filter implementation 0003628: [Feature] FEM, export vtk pipeline to vtk file format directly 0003633: [Feature] FEM, post processing, read, store and display cell (element) results 0003706: [Feature] FEM, constraints, a very general constraint property setter 0003742: [Feature] FEM, make elmer writer fully compatipble with FreeCAD unit system 0004388: [Feature] Start paraview with selected result from within FC 0004390: [Feature] Save FEM Clipping Plane as different elements in the model/tree 0003933: [Feature] Meshing should be non blocking or at least has a progress bar/log output (berndhahnebach) 0002988: [Bug] FEM, GUI, Netgen and GMSH FEM mesh creation buttons don't clean up on error or cancel (berndhahnebach) 0003145: [Feature] FEM, VTK post processing, data at point filter, some issues (berndhahnebach) 0003315: [Bug] FEM, mesh groups only work after calling gmsh again (berndhahnebach) 0003612: [Feature] FEM, be able to run a analysis with a given CalculiX input file (berndhahnebach) 0003622: [Feature] FEM, calculix, support analysis type 'no analysis' for model checking (berndhahnebach) 0003782: [Bug] impossible to remove several references from FEM references lists (uwestoehr) 0003783: [Bug] several faces cannot be added at once in some FEM dialogs (uwestoehr) 0003874: [Feature] scaling of eigenmodes in free vibration analysis (berndhahnebach) 0003883: [Feature] FEM, add group info to the GUI tool show mesh information (berndhahnebach) 0003906: [Bug] missing feedback when exporting to FEM mesh formats (berndhahnebach) 0003932: [Feature] FEM - Selecting the interior solids of CompSolid (berndhahnebach) 0003937: [Bug] DataAlongLine Create Plot Always plot Magnitude (berndhahnebach) 0004394: [Feature] Clean up the ElectrostaticPotential task panel, make it smart and pretty. (HoWil) 0004395: [Feature] Homogenise/update selection dialogues in FEM (HoWil) 0003901: [General] Many English strings that aren't translated in FEM workbench (berndhahnebach)

0003517: [Bug] STL/Mesh export options only visible after first mesh import

0001558: [Feature] Save CAD data as text (JSON) for version control 0002336: [Feature] importing .obj file should use the object names as labels 0002732: [General] IGES and STEP export compatibility 0004201: [Feature] Add Support for Bezier Curves in Import Module Dxf Exporter 0001156: [Feature] JT File Format 0002335: [Feature] export in .obj file should use the objects labels 0004099: [Bug] FC crashes when try to make wall from segment (reason: faulty DXF file) (abdullah) 0000337: [Feature] add support for Rhino3D files 0003435: [Bug] Crash with STEP export (Upstream OCC bug) 0003070: [General] VRML 2 crashes with corner cases 0003606: [Feature] Point Cloud files *.asc with huge coordinates could be imported with wrong coordinates. 0002940: [Feature] Add material information to exported AMFs (ian.rees) 0003834: [Feature] Support of AXIS2_PLACEMENT_3D entities in STEP files (realthunder) 0003596: [Feature] DWG import/export - 3rd-party Teigha File Converter was renamed ODA, exec file path needs to be updated (chennes) 0003131: [Feature] fix export format in options (chennes)

0003348: [General] Sketch constraint flips direction 0004066: [Bug] Sketcher - Simple example where the order of Element creation unexpectedly affects Trim results 0004387: [Bug] Popularity contest algorithm makes a poor choice for redundant removal. 0003529: [General] Solver reports redundant constraints on (blue) measures in reference mode (abdullah) 0003961: [Bug] DogLeg fail 0003976: [Bug] Solver falsely detects redundant constraints in specific conditions 0004284: [Bug] Solver reports false positive redundancy message after applying equality (abdullah) 0000704: [General] Sketcher Fully constrained report based on primitives (Lines, arcs) (abdullah) 0000754: [General] Sketcher doesn't report that a fully constrained sketch may have multiple (finite) solutions (abdullah) 0002069: [General] Display which parts of a sketch are fully constrained. (abdullah) 0003286: [General] DogLeg bug (falling back to LevenbergMarquardt) and feature request (abdullah) 0003635: [General] Solver does not use point-line-tangency in all possible cases (abdullah) 0003730: [General] Check effect of squared error in convergence (abdullah) 0003731: [General] SQP usage / debug information (abdullah) 0003735: [General] Arc convergence problems (abdullah) 0003745: [General] Solver failing on certain sketch (abdullah) 0003773: [General] Levenberg-Marquardt: Solver reports Sketch to be fully constrained which it isn't (abdullah) 0003791: [General] Solver fails to find redundancy (abdullah) 0003929: [General] SQP linear search second order step (abdullah) 0004032: [Bug] Solver claims Sketch to be fully constrained which it isn't (abdullah) 0004042: [Bug] Solver claims solvable sketch to be unsolved (abdullah) 0004044: [Bug] Improvement of solver's popularity contest to remove partially redundant constraints. (abdullah) 0004045: [Bug] DogLeg does not consistently converge to a same solution given the same input. (abdullah)

0003348: [General] Sketch constraint flips direction 0004066: [Bug] Sketcher - Simple example where the order of Element creation unexpectedly affects Trim results 0004387: [Bug] Popularity contest algorithm makes a poor choice for redundant removal. 0003529: [General] Solver reports redundant constraints on (blue) measures in reference mode (abdullah) 0003961: [Bug] DogLeg fail 0003976: [Bug] Solver falsely detects redundant constraints in specific conditions 0004284: [Bug] Solver reports false positive redundancy message after applying equality (abdullah) 0000704: [General] Sketcher Fully constrained report based on primitives (Lines, arcs) (abdullah) 0000754: [General] Sketcher doesn't report that a fully constrained sketch may have multiple (finite) solutions (abdullah) 0002069: [General] Display which parts of a sketch are fully constrained. (abdullah) 0003286: [General] DogLeg bug (falling back to LevenbergMarquardt) and feature request (abdullah) 0003635: [General] Solver does not use point-line-tangency in all possible cases (abdullah) 0003730: [General] Check effect of squared error in convergence (abdullah) 0003731: [General] SQP usage / debug information (abdullah) 0003735: [General] Arc convergence problems (abdullah) 0003745: [General] Solver failing on certain sketch (abdullah) 0003773: [General] Levenberg-Marquardt: Solver reports Sketch to be fully constrained which it isn't (abdullah) 0003791: [General] Solver fails to find redundancy (abdullah) 0003929: [General] SQP linear search second order step (abdullah) 0004032: [Bug] Solver claims Sketch to be fully constrained which it isn't (abdullah) 0004042: [Bug] Solver claims solvable sketch to be unsolved (abdullah) 0004044: [Bug] Improvement of solver's popularity contest to remove partially redundant constraints. (abdullah) 0004045: [Bug] DogLeg does not consistently converge to a same solution given the same input. (abdullah)

0004343: [Bug] OpenSCAD broken with AppImage (looo)

0003713: [Feature] Sweep Missing Path / Spine in Dialog or Properties 0003958: [Bug] Boolean Cut not working correctly when using arrays (polar in this case) 0004357: [Bug] Shape color is not displayed correctly after change in tree 0002595: [Feature] Part ShapeBuilder Enhancements 0002677: [Feature] Extend TopoShape API with topology traversing functionality 0002905: [Feature] cannot make a compound or a union or even a simple copy of the App::Part structure 0003196: [Feature] Extend attachment engine 0003858: [Feature] Additive primitives of the Part WB should use existing task dialogs of PartDesign WB 0004034: [Feature] Easier Way to Toggle BOPCheck On / Off 0004075: [Feature] CompoundFilter items selection helper 0004159: [Feature] Show spiral length in the property editor 0004262: [Bug] Thickness function crashes FC when applied on a pipe that has equal section radius & bending radius 0002748: [Feature] PART_WB: Add "Measure Radial" to Std Measure Menu 0004358: [Feature] Combo view > Data should consistently retain state of property foldouts 0001926: [Bug] Crash when creating sweep (fix pending on the upstream release of OCC 7.7) (shoogen) 0003670: [Bug] Thickness operation for part fails (upstream OCC bug) 0003458: [Bug] Recompute does not create a solid containing a complex shaped hole (upstream OCC bug) 0000122: [Feature] Part reference element 0002508: [Bug] Lofting edges get swapped over 0002509: [Bug] Sweep using bezier curve bug 0002721: [Bug] Face order instability with Part Extrude and friends (DeepSOIC) 0001288: [Feature] Edit Mode for Part::Spline (wmayer) 0001739: [General] Sweep tolerances are too high (ickby) 0002700: [Bug] Part Offset2D fill offset problems 0003407: [Feature] Provide Attachment mode perpendicular to an existing plane 0002204: [Bug] Crash when unioning toruses (upstream OCC bug) (wmayer) 0004247: [Bug] GeometryCurvePy::intersect / GeometryCurvePy::intersectCC Segmentation Fault with OCC 7.4 (Fixed in OCC 7.5) 0003954: [Bug] 2D Offset crashes with particular model (chennes) 0004414: [Bug] MacOS only: CheckGeometry with BOPCheck hides menu and disbles visibility toggle (chrisb) 0004573: [Feature] missing bindings to expressions in primitives location dialog (wmayer) 0003053: [Feature] PART - List of important but empty wiki pages that need contents

0004581: [Bug] Transformed object becomes invisible after sucessful multi transformation (uwestoehr) 0004567: [Bug] Pattern from a feature type UpToFace and Offset > copy whole body (wmayer) 0004457: [Bug] Crash when selecting a line or face and then "select reference" while trying to Revolve

0003938: [Bug] Polar Pattern "transformed shapes do not intersect support" (upstream OCC bug) 0004523: [Bug] Crash (SIGSEGV) when moving elements of a constrained sketch 0002497: [Bug] Changing dimension 40.001 to a value <= 40 (and > 30) gets the expected behavior. More than 40 gets the the buggy one 0003600: [Feature] Improve PartDesign Transformation features performance       0003527: [Feature] Unable to edit linear Patterns 0004378: [Bug] Crash after changing a pocket-size 0001262: [Feature] Smart tools for part design (Grow, Lattice, Snap&Lock, Split to mill, Convert to Frame, Puzzle) 0001801: [Feature] Ball corner 0001802: [Feature] Add Devil (rounded, angled and tapered contact surface with a round hole in it) 0001987: [Feature] Map a sketch to a face behaviour improvement 0002037: [Feature] Fillet to maximum possible value 0002220: [Feature] Extrude contours (sketch regions). 0002510: [Feature] Request for attachment mode for a plane on a cylinder etc. 0003067: [Feature] Add Mirror body tool to PartDesign 0003177: [Feature] Part Design Pad should allow besides "Up to face" something like "Up to plane" as well 0003269: [Feature] Draft from Loft doesn't work. 0003301: [Feature] Container for intersections 0003751: [Bug] FreeCAD crashes on Loft creation when master-sketch added as a section 0003889: [Feature] Dragging a PartDesign object to a body should not create a BaseFeature in all cases 0003893: [Feature] Counterbore and countersink with top clearance 0003905: [Bug] Editing unlinked parts of a sketch breaks other sketches that have edges linked to it 0001742: [Feature] Add Reverse Fillet Tool or Option in Part / Part Design 0003060: [Feature] More streamlined UI for adding edges and faces (e.g. for PD Fillet tool)       0003297: [Feature] Part Design usability improvement for selection of Sweep Path (abdullah) 0003171: [Feature] Advanced filleting options 0003942: [Feature] Using "Tab" to cycle thru properties, go up to the first once we get to the last. 0003943: [Bug] Disable auto hide solid option when entering Sketch edit mode sets and leaves solid hidden 0004039: [Bug] MapSketch tool in PartDesign creates cyclic dependencies by offering Sketches their own axis planes 0004040: [Bug] lack of error message on failing to pad sketch 0004135: [Feature] Add PartDesign Common operations 0004211: [Bug] PartDesign Pad 'Up to face' has issues when selecting a ShapeBinder's or Binder's face 0004267: [Bug] adding primitives changes body coordinate system 0004300: [Feature] Part object, if not at origin, moves to global origin when moved to Part Design Body 0004334: [Feature] Thicken sketch 0004412: [Bug] Pockets into a circular hole and refining object damages the object structure 0004417: [Bug] Additive/Subtractive Pipe while in wireframe view leaves multiple features visible 0004484: [Bug] ShapeBinder can or not be padded depending on pad type 0004498: [Bug] Loft between sketches with inner and outer elements created in different order results in bad 3D geometry 0002003: [Feature] Embossing/imprinting an FC logo directly to a solid model 0003799: [Feature] Improve the "Create a hole in the selected sketch" task (remember previous task settings) 0001190: [Feature] Option for PolarPattern to obey individual UpToFirst/UpToLast/UpToFace pad features for each instance. 0004129: [Bug] Crash on setting certain dimensions in a sketch (Upstream OCC bug) (abdullah) 0004308: [Bug] 5 standard options are missing in the PartDesign Tree view context menu. 0003425: [Bug] Boolean operation in PDN fails depending on placement of one of the parts 0001646: [Bug] TCollection_IndexedDataMap::FindFromKey error when sweeping along BezierCurve (upstream OCC bug) 0004574: [Bug] PartDesign Boolean Cut: attempted translation along X-axis causes unexpected rotation 0003977: [Bug] Fillet feature fails on solid obtained by revolution 0000622: [Feature] Add taper angle feature in pad and pocket 0002461: [Bug] Crash when creating loft between two sketches 0003115: [Feature] Reassign pad or pocket on complete face (AKA Extend editor to allow to re-assign a different value for Profile property) 0003770: [Feature] Scripted references to body origin planes 0003888: [Bug] Moving object in body causes cyclic dependencies 0003975: [Bug] Specific pocket fails with solid obtained by revolution 0004029: [Bug] Pocket operation yields invalid result with "Refine = True" 0004061: [Bug] Weird behavior in Placement dialog when using "center of mass" with Datum Plane 0000876: [Feature] Topological naming interface (realthunder)       0002755: [Bug] Order of external edges may change 0003998: [Feature] Fillet tool not showing which edge/face fails (abdullah) 0001567: [Feature] Request for Ability to Trim Surfaces in Part and Part Design WB's (wmayer) 0001942: [Feature] Allow optical+physical material properties in addition to RGB color specification (eivindkvedalen) 0002863: [Feature] Add Mirror body feature to PartDesign (ickby) 0003028: [Feature] [PartDesign] Per face colors and keeping colors when adding a feature (abdullah) 0003065: [Bug] Part::checkIntersection returns false negatives preventing functioning of PDN Mirror transformation when faces just touch 0003151: [Bug] Renaming elements in the DataTab can make Expressions invalid (eivindkvedalen) 0003186: [Bug] Reference select dialog needs to be reworked (ickby) 0003195: [Feature] Make Transformation tool available for GeoFeatureGroups (ickby) 0003500: [Feature] Adding Interpolating Spline feature to Sketcher/PartDesign (abdullah) 0000938: [Bug] Fillet can not round a face (upstream OCC bug) (wmayer)       0001192: [Feature] Full round fillet 0002325: [Bug] Pad -> Fillet -> Apply Thickness causes crash (upstream OCC bug) (abdullah) 0003149: [Bug] Duplicate body creates a mess (ickby) 0003331: [Feature] PartDesign: update wiki pages to reference changes in 0.17 (normandc) 0003608: [Feature] Fillets with variable radius (wmayer) 0003949: [Bug] PartDesign Loft test failures on i386 (kkremitzki) 0004808: [Bug] "Part Design" > "Hole" > "Model Thread" > "Thread Depth" > "Dimension" (uwestoehr) 0003818: [Feature] PartDesign Hole Depth Dimension should provide the option not to take the angled drill point type into account (uwestoehr) 0003830: [Bug] Features loose colors set with "Set colors" on file saving 0003679: [Bug] Polar pattern not working on a midplane pocket (upstream OCC bug) (chrisb) 0003142: [Bug] Crash creating fillets on sweep (OCC bug) (chennes) 0004518: [Bug] Segfault in some models when making chamfer or fillet (on macos) (chennes) 0004487: [Bug] Crash on changing Fillet Radius (OCC issue to be retested with OCC > 7.5) (chennes) 0004319: [Bug] Segfault removing edge from sketch (chennes) 0003970: [Bug] crash when adding chamfer to an additive primitive (chennes) 0004607: [Bug] Can't loft to a Point object in Part Design (jnxd) 0004785: [Bug] UI broken for padding and pocketing direction when the base is a face (uwestoehr) 0004786: [Feature] missing Offset option for pockets (uwestoehr) 0003370: [Bug] Datum Plane in Sketcher often switches to opaque Yellow when selecting external Geometry. (chennes) 0003927: [Bug] Refine of PartDesign Sweep does nothing (chrisb) 0004139: [Bug] v0.18-16131 - Macro - SubtractivePipe attached path object issues after macro executed. (wmayer) 0004365: [Bug] UI click event triggered twice 0002522: [Bug] part design fillet and chamfer tool will not reproduce same edge# or face# (realthunder) 0002188: [Bug] Modifying a pocket sketch destroys orientation and position of another pocket (realthunder) 0001765: [Bug] Fillet object not updated after change to underlying sketch (realthunder) 0001625: [Bug] change something old in the design tree didn't update the latest result (realthunder) 0000794: [Bug] External reference in sketch changes 0004205: [Bug] Bad behavior when entering manually PD/AdditivePipe path (wmayer)

0004561: [Bug] OpenCamLib (OCL) raises an error on incorrect tool attributes and causes FreeCAD segfault 0004555: [Bug] gcode importer regression bug (sliptonic) 0004572: [Bug] Property in propertybag will allow space in name but throws error. Sanitize input. (sliptonic) 0004557: [Bug] Trying to add tag with dressup causes 'snapper' error in console. (mlampert)

0004831: [Bug] Path Command parameters are not mutable. 0004778: [Bug] Tag dressup throws error if applied after boundary dressup. 0004036: [Bug] Job | Tool editor does not get keystrokes when mm/s items are selected. 0004652: [Bug] Drilling Operation missing move to operation start depth. 0004558: [Feature] Helix operation should handle conical use-cases 0003481: [Feature] Allow use of Draft Picker to set start points in paths. 0003676: [Bug] Pocket operations in Spiral pattern sometimes leave island on face 0003914: [Bug] Path Stock using Existing Solid not maintaining state 0004096: [Bug] Material allowance does not seem to differentiate between air or unused stock and remaining parts of the model. 0004406: [Bug] Increasing Memory usage when using Path WB and Adaptive Processing 0004435: [Bug] Wrong cut side of profil tool 0004468: [Feature] FreeCAD Path needs a new Postprocessor architecture. 0004532: [Bug] Canceling a dressup does not clean up properly 0004545: [Feature] Allow engraving of 3D paths. 0004551: [Bug] PathGeom.edgeForCmd() function can't handle full-turn circles. 0002839: [Feature] Dogbone dressup needs visualisation and preferences (mlampert) 0002660: [Feature] Improving path surfacing object feature 0003099: [Feature] Tapping (sliptonic) 0003570: [Feature] PATH: Facing Operations with large tools 0004009: [Bug] Dogbone locks up on path with two surface elements (mlampert) 0004647: [Bug] [Path] - Releative location of Toolbit files (russ4262) 0002916: [Feature] Add knife align up function to locate knife at begining cut precisely 0003989: [Bug] Wrong simulation after setting a start point 0004071: [Feature] Job path visualization 0004280: [Bug] LeadinLeadout DressUp Causes Tool Crash on Deburr Ops 0004459: [Feature] annoying : confirmation popup window hidden behind main-window 0004465: [Bug] Path toolbox operation order fails 0004769: [Bug] Changing TC with same tool number but different spindle speed doesn't produce correct gcode (sliptonic) 0003714: [Bug] Milling simulation continuously stealing window focus and releases it (shaiseger) 0003790: [Bug] Volumetric milling simulation of arcs creating artifacts (shaiseger) 0004038: [Bug] PathArea offsetting produces incorrect pocket path if shape is small relative to tool (realthunder) 0004320: [Feature] Support incremental Gcode in postprocessors (sliptonic) 0004476: [Feature] Path Inspect tool doesn't respect user's preferred units (sliptonic) 0004458: [Bug] [PATH] Engrave 'start at vertex' gives wrong path (sliptonic) 0004507: [Feature] Add depth support to vcarve operation (sliptonic) 0003984: [Patch] Creating a Path Job object fails with "PySide2.QtWidgets.QDialog' object has no attribute 'templateGroup'" (wmayer) 0003336: [Feature] Tool Data Struture, Library, and Editor overhaul (dubstar_04) 0004547: [Bug] pointless dialogue when adding new tool to job (sliptonic)

0003277: [General] Omitting translation pages in Wiki search results 0004245: [General] MantisBT text field needs size limit 0003777: [Feature] Add Crowdin API Issue lister to Crowdin scripts 0002731: [Feature] Add exception stacktrace upload function (AKA crash reporting) 0003711: [General] FreeCAD wiki mobile friendly stylesheet 0003716: [General] Fix the FreeCAD Wiki Sidebar 0003797: [Feature] Script that checks if AppImage .zsync file is present in Github Release page 0004328: [General] Several "Scripted objects" examples don't work 0004420: [General] Shortage of high-quality issues suitable for bounties 0003778: [Feature] Central translate function (Kunda1) 0003546: [Feature] [Forum] Embed PeerTube videos with the video tag 0003206: [General] TravisCI to run code linting to report trailing whitespace/tabs + LF line endings (Kunda1) 0003328: [Bug] Make new MediaWiki skin with nav header (AR795) 0003821: [General] Docker container for FreeCAD development (David_D) 0004019: [Feature] FreeCAD Website - .htaccess hack to dissappear .php extension from URL (yorik) 0004033: [General] Translations of External workbenches need to be incorporated in to Crowdin (import/export) translation scripts (yorik) 0004271: [General] Wiki: Test the Mediawiki:YouTube extension to embed videos on the wiki (kkremitzki) 0004299: [General] Non-ASCII usernames in MediaWiki not working (kkremitzki) 0003645: [General] Mediawiki Extension: Please install MassRegex to make sweeping changes to blocks of wiki pages at once (kkremitzki) 0003828: [Feature] Triage bidirectional script: Trigger automated phpBB forum thread from MantisBT ticket (and post forum thread back to ticket) (Kunda1) 0003715: [General] Automate push/pull translations from Crowdin 0004578: [General] Strings in the UI that aren't being translated (Kunda1) 0003259: [Feature] Buildbot framework       0003205: [General] TravisCI to check spelling of submitted Pull Requests to FC repo 0003747: [General] Update phpbb to 3.2.7 (kkremitzki)

0003822: [Feature] OSPRay or Embree raytracing engines (howetuft)

0002091: [General] 3D printer simulator - a new nodekit?

0004496: [Bug] B-spline weights are incorrectly calculated out of the weight circle radii (uwestoehr) 0004513: [Bug] Sketcher mirror command incorrectly adds vertical/horizontal constraints when mirroring around non-axis aligned line

0004250: [Feature] Sketcher placement and its axis visualisation 0003996: [Feature] Shortcut buttons for primitive shapes are not highlighted when active 0001416: [Feature] Constraints creation "on the fly" 0004248: [Feature] Shorctut for Transform 0003198: [Feature] Displaying name instead of value in Sketcher constraint 0004124: [Bug] Sketcher angle produces errors when units set in m/kg/degree 0001343: [Feature] Request for additional (dynamic) detail in error messages 0002492: [Feature] Multiple entities overlayed 0002774: [Feature] Can not select points in sketcher properly when changing viewangle 0003086: [Feature] CTRL key during line operation increase the snap active area such that it is easy to match points 0003107: [Feature] Customize Sketcher units 0003203: [Feature] More convenient arc-drawing in polyline mode 0003374: [Feature] Sketch + Gui.SelectionEx() - - - Identify Geometry Index Outside Edit Mode 0003576: [Feature] Orthogonally restrict dragging of geometry in Sketcher (invoked by pressing ctrl or shift or ctrl+shift) 0003780: [Feature] Feature request sketcher - overload of the horizontal/vertical distance constraints between curves 0003849: [Feature] Cursor info in Sketcher doesn't use proper units 0003928: [Feature] missing preferences option to specify increment of spin buttons in dialogs 0004160: [Feature] Constraint Symbols and Numbers In The 3D View - Allow Users To Specify a Size 0004184: [Feature] Add an addition usage to a current icon in sketcher 0004185: [Feature] Sketcher opens a sketch at the current location, we need an icon to take us to the sketch. 0004253: [Feature] No "snap to intersection" implemented in Sketcher 0004331: [Feature] Enable visual grouping of constraints 0004472: [Feature] Place and orientate dimension constraints in one go 0004503: [Feature] Dimension between 2 concentric circles 0004544: [Feature] Add new method for trim sketch 0004126: [Bug] 0 length lines in sketch introduce bugs at Part-> Revolve time 0004379: [Bug] Segfault while Mirroring sketch (abdullah) 0003803: [Feature] Improvement of "Constraints" list in the Sketch task of the "Combo view" 0000847: [Feature] [Sketcher] Dragging + snap to grid 0003489: [Feature] Toggle visibility of all construction geometry 0004467: [Bug] Cloning and placing to automatically constrain to old objects creates malformed constraints 0001271: [Feature] Allow User to Toggle Automatic Grid Sizeing in Sketcher On and Off 0003910: [Bug] sketch lost tangent constraint using trim 0003935: [Feature] Improved Sketcher Messages (abdullah) 0001436: [Feature] Sketcher: Break a Line and Add a Point onto a Line (abdullah) 0004641: [Feature] Sketcher Clone - extend to allow substitution of dimensional constraints between different geometry items (abdullah) 0001560: [Feature] Provide ability to fine-tune auto constraints. (abdullah) 0002052: [Feature] Add Chamfer Edge-Tool (abdullah) 0002078: [Feature] Support to apply equality constraint on angles (abdullah) 0003110: [Feature] Sketcher: add support of relevant constraints to B-splines (abdullah) 0003438: [Feature] Show in Sketcher if the sketch is closed (abdullah) 0003649: [Bug] Improve handling of block constraint if dimensional constraints are involved (abdullah) 0003655: [Bug] GeomAPI_ExtremaCurveCurve fails to detect intersection (upstream OCCT bug) (abdullah) 0003660: [Feature] Infinite lines in Sketcher (abdullah) 0003667: [Bug] wrong normals of tangents of ellipses (abdullah) 0003668: [Feature] Implement offset curves in the sketcher (abdullah) 0003671: [Feature] Sketcher Analysis interface improvements (abdullah) 0003681: [Feature] Valid profile validation at sketch exit (abdullah) 0003682: [Feature] Sketch Analysis new tests (abdullah) 0003684: [Feature] Support for trimming arcs of hyperbola and arcs of parabola (abdullah) 0003708: [Feature] Add an Offset tool to the Sketcher (abdullah) 0003718: [Feature] Block constraint does not work on GeomPoints (abdullah) 0003743: [Feature] Control log output of solver (abdullah) 0003863: [Bug] Point-on-line not correctly auto-removed when redundant (abdullah) 0004053: [Feature] CarbonCopy should use names of constraints if available. (abdullah) 0004173: [Feature] Error in Sketch not showing in tree nor solver messages (abdullah) 0004292: [Bug] Dimension values are displayed from reverse (abdullah) 0004398: [Feature] Improve the sketcher clone tool (abdullah) 0004419: [Bug] Trim of ellipse creates invalid constraints (abdullah) 0004512: [Feature] Alternative constructions methods for B-Spline (abdullah) 0004519: [Feature] Formalise the Sketcher solve(), update and signaling (abdullah) 0004530: [Feature] Explore geometry element based block constraint (abdullah) 0004538: [Bug] Redundant constraint is ignored by the solver (abdullah) 0004522: [Bug] SketcherSettingsColors.ui inconsistencies (abdullah) 0004483: [Feature] Improve UI to specify weights for B-splines (abdullah) 0004220: [Bug] Most of the sketcher shortcuts are not working (abdullah) 0003181: [Feature] Allow to toggle the construction of points (chrisb) 0004231: [Feature] The geometric element "Point" should be usable and visible in 3D view outside of Sketcher (chrisb) 0003054: [Feature] Sketcher - List of important but empty wiki pages that need contents

0004003: [Bug] Renaming spreadsheet no longer has any affect on field tags. 0004410: [Feature] Feature Request: Spreadsheet zoom, as per Excel and LibreCalc 0002474: [Feature] Integrate LibreOffice Calc via GUI 0004093: [General] Spreadsheet losts Alias-values 0002100: [Feature] Spreadsheet: Additional Inverse Display Units 0004024: [Feature] any change in a spreadsheet forces a recomputation of the whole part 0003560: [Bug] Renaming alias in spreadsheet changes the spreadsheet part of the reference from label to internal name (eivindkvedalen) 0002472: [Feature] Spreadsheet - Move Cells (eivindkvedalen) 0003460: [Feature] Add the following functions to expressions and spreadsheet: concatenate text and indirect (realthunder) 0002957: [Feature] please add spreadsheet direct printing (wmayer)

0004553: [Bug] properties in the View tab cannot be undone 0004552: [Bug] Changes made via dimension dialog cannot be undone (wmayer)

0003572: [Feature] TechDraw: Easier Color Drawings 0003575: [Feature] TechDraw: Don't recompute on text changes 0004828: [Feature] Allow Entry of Section Origin Before Setting Section Normal 0004827: [Feature] Show Section Line if Base View is a Section 0004221: [Feature] Ability to drag and drop the circle/square defining the detail view in TechDraw 0003603: [Feature] Preserve sketch colors in DXF exports 0004235: [Feature] TechDraw: "Format Spec" field not changed automaticaly 0003646: [Feature] Allow manual entry of the main direction (the front) for a ProjectionGroup 0003647: [Feature] Allow for easy editing of TechDraw elements by double clicking 0003005: [Feature] TechDraw - Internal View Consistency 0003008: [Feature] TechDraw - Drawing Tools 0003011: [Feature] TechDraw - "broken view" - the ability to depict very large objects on the page. 0003014: [Feature] TechDraw - 2D Geometry 0003345: [Feature] Provide Alignment Guidelines On Drawing Page 0003369: [Feature] inner/outer Threads 0003609: [Feature] TechDraw - Auxiliary View 0003692: [Feature] Add Centermark for Circular BSplines 0003911: [Feature] Autofill information in SVG page template 0004114: [Feature] TechDraw Workbench Intersection dimensioning. 0004181: [Feature] Add View of Sketch with colours and dimensions 0004208: [Feature] Allow Adjustment of Stacking Order of Views 0004227: [Feature] TechDraw: Add new option - Filter of Feature 0004386: [Feature] TD Weld Symbols Improvements 0004413: [Feature] Allow Selection of Print Area and Scale 0004448: [Bug] 0.19 Tech Draw does not correctly open files from previous versions. 0004449: [Feature] Feature request: Please add a preferences item to suppress the second arrowhead on diameter dimensions. 0004486: [Bug] Detail view is empty if the object is not a solid 0004489: [Feature] TechDraw - normative correct simplified presentation of Thread in Top View and Cross section according to ISO 6410–1 standard 0004128: [Feature] Allow Angled Section Views (wandererfan) 0003378: [Feature] Feature: BOM (Bill of Materials) functionality 0003077: [Feature] "Headless" export of SVG and PDF from TechDraw 0004122: [Bug] HLR Returns No Edges for Shape (wandererfan) 0004485: [Feature] Feature request: please add an option to supress trailing zeros on all Tech Draw dimensions (wandererfan) 0004598: [Bug] Segfault when deleting template without page (wmayer) 0004549: [Bug] [TD] ArchView only shows objects if section plane cuts through them (yorik)