View Issue Details

IDProjectCategoryView StatusLast Update
0004651PartBugpublic2021-05-13 16:59
ReporterDaniele75 Assigned To 
PriorityhighSeverityminorReproducibilityalways
Status feedbackResolutionopen 
OSWindows 10 HomeOS Version20H2 
Product Version0.19 
Summary0004651: Problem in using the sweep function
Description
I found a bug when making springs that occurs in version 19, while up to 18 it worked smoothly.

Steps To Reproduce1° new file
2° goto "Part" ambient
3° creates parametric geometric primitives
4° Propeller
5° set dimension: pitch 0,75 ; height 3mm ; radius 1,3mm
6° Create Propeller ( Ok )
7° goto "Sketcher" ambient
8° Create new Sketcher
9° Select XZ floor
10° Create circle
11° Set constraints... radius 0,2mm ; height from y axis 0mm ; distance from x axis 1,3mm ( same than radius of propeller )
12° close
13° goto "Part" ambient
14° select Sweep utilities
15° Select Sketch from list available profiles
16° bring to selected profiles
17° select all the propeller in the draw ( black to green color )
18° check create solid + frenet
19° OK


the sweep obtained is corrupted.

TagsNo tags attached.
FreeCAD InformationI discovered the problem as initially I had version 18 installed on one pc, then on another I installed version 19.
Seeing the problem with the 19 I tried both versions on the same pc, first replacing it with the previous one then trying to use them both in the same pc at the same time.

Activities

openBrain

2021-05-13 16:59

developer   ~0015662

@Daniele75 : please address your issue according our reporting guidelines by opening a new topic on our forum. Thx

yorik

2022-03-03 13:55

administrator   ~0017043

This ticket has been migrated to GitHub as issue 6211.

Issue History

Date Modified Username Field Change
2021-05-01 11:51 Daniele75 New Issue
2021-05-13 16:59 openBrain Status new => feedback
2021-05-13 16:59 openBrain Note Added: 0015662