View Revisions: Issue #4211

Summary 0004211: PartDesign Pad 'Up to face' has issues when selecting a ShapeBinder's or Binder's face
Revision 2019-12-05 07:16 by Dan-K
Steps To Reproduce 1. Download and open the attached 'uptoface-bug.FCStd' file.
2. Notice the 'Target Body' PartDesign Body has a ShapeBinder and a Binder of the 'Static Body' body and that the positions of these binders are correct.
3. Hide the 'Static Body' and one of the binder objects such that the other binder object is visible.
4. Switch to the 'PartDesign' workbench.
5. Select 'Sketch002' from the tree.
6. Press the 'PartDesign' 'Pad' button.
7. Change the 'Type' to 'Up to face'.
8. Select one of the two faces of the visible binder object whose normal is parallel to the sketch's face.
9. Press 'OK'.
10. Notice the error popup and error message in the 'Report view'.
11. This can be repeated with the other binder object, the issue will happen with both ShapeBinder and Binder.
Revision 2019-12-05 06:06 by Dan-K
Steps To Reproduce 1. Download and open the attached 'uptoface-bug.FCStd' file.
2. Notice the 'Target Object' PartDesign Body has a ShapeBinder and a Binder of the 'Static Base' body and that the positions of these binders are correct.
3. Hide the 'Static Base' and one of the binder objects such that the other binder object is visible.
4. Switch to the 'PartDesign' workbench.
5. Select 'Sketch002' from the tree.
6. Press the 'PartDesign' 'Pad' button.
7. Change the 'Type' to 'Up to face'.
8. Select one of the two faces of the visible binder object whose normal is parallel to the sketch's face.
9. Press 'OK'.
10. Notice the error popup and error message in the 'Report view'.
11. This can be repeated with the other binder object, the issue will happen with both ShapeBinder and Binder.
Revision 2019-12-05 06:04 by Dan-K
Steps To Reproduce 1. Download and open the attached 'uptoface-bug.FCStd' file.
2. Notice the 'Target Object' PartDesign Body has a ShapeBinder and a Binder of the 'Static Base' body and that the positions of these binders are correct.
3. Hide the 'Static Base' and one of the binder objects such that the other binder object is visible.
4. Switch to the 'PartDesign' workbench.
5. Select 'Sketch002' from the tree.
6. Press the 'PartDesign' 'Pad' button.
7. Change the 'Type' to 'Up to face'.
8. Select one of the two faces of the visible binder object whose normal is parallel to the sketch's face.
9. Press 'OK'.
10. Notice the error popup and error message in the 'Report view'.
11. This can be repeated with the other binder object, the issue will happen with both ShapeBinder and Binder.