View Revisions: Issue #3288

Summary 0003288: Sketch Angle Constraints Wrong Reference Reading
Revision 2017-12-24 16:17 by Kunda1
Description Forum Thread

There are a few angle Constraints in the sketch below as reference.

A point move around and the angles update as reference.

At some particular cases, see screencapture for the one captured, a reading return 11.76 deg though it is apparently 2 lines bigger than 90 degrees.
[It report the complementary angle i.e.,-ve (180 - correct angle) ]

The reference provide wrong reading frustrate subsequent calculation / expression.

Interestingly, when the file is untouched and re-opened, it reads (I am not sure if re-opening the sketch w/o closing the file do the same thing) -168.xx degree which is the correct reading.

OS: Linux
Word size of OS: 64-bit
Word size of FreeCAD: 64-bit
Version: 0.17.12852 (Git)
Build type: None
Branch: master
Hash: 8e3b2d7e84924444bc219133a7e0bbd07413cf4f
Python version: 2.7.6
Qt version: 4.8.6
Coin version: 4.0.0a
OCC version: 7.1.0
Locale: English/UnitedStates (en_US)

Revision 2017-12-24 14:57 by paullee
Description Your text to link here...

There are a few angle Constraints in the sketch below as reference.

A point move around and the angles update as reference.

At some particular cases, see screencapture for the one captured, a reading return 11.76 deg though it is apparently 2 lines bigger than 90 degrees.
[It report the complementary angle i.e.,-ve (180 - correct angle) ]

The reference provide wrong reading frustrate subsequent calculation / expression.

Interestingly, when the file is untouched and re-opened, it reads (I am not sure if re-opening the sketch w/o closing the file do the same thing) -168.xx degree which is the correct reading.

OS: Linux
Word size of OS: 64-bit
Word size of FreeCAD: 64-bit
Version: 0.17.12852 (Git)
Build type: None
Branch: master
Hash: 8e3b2d7e84924444bc219133a7e0bbd07413cf4f
Python version: 2.7.6
Qt version: 4.8.6
Coin version: 4.0.0a
OCC version: 7.1.0
Locale: English/UnitedStates (en_US)